robotpkg/graphics/kpp-interface bulk build results
Log for kpp-interface-2.1.2 on CentOS-7-x86_64: bulk.log (Back)
=> Checking for clear installation
===> Installing bootstrap dependencies for kpp-interface-2.1.2
=> Installing /opt/robotpkg/var/lib/robotpkg/packages/bsd/CentOS-7-x86_64/All/digest-20080510.tgz
=> Installing /opt/robotpkg/var/lib/robotpkg/packages/bsd/CentOS-7-x86_64/All/tnftp-20130505~ssl.tgz
===> Checking bootstrap dependencies for kpp-interface-2.1.2
=> Required robotpkg package digest>=20080510: digest-20080510 found
=> Required robotpkg package tnftp>=20091122: tnftp-20130505~ssl found
=> Required system package gzip: gzip-1.5 found
=> Required system package pax and tar archivers: pax found
=> Required system package pkg_install>=20110805.7: pkg_install-20110805.7 found
===> Done bootstrap-depends for kpp-interface-2.1.2
===> Installing full dependencies for kpp-interface-2.1.2
=> Dependency digest-20080510 already installed
=> Required robotpkg package hpp-corbaserver>=3.1.0: N/A
=> Installing /opt/robotpkg/var/lib/robotpkg/packages/bsd/CentOS-7-x86_64/All/hpp-model-urdf-3.1.0r1.tgz
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
To use ros, the following environment variables must contain those values:
ROS_MASTER_URI http://localhost:11311
ROS_PACKAGE_PATH /opt/openrobots/share
PYTHONPATH /opt/openrobots/lib/python2.7/site-packages
PATH /opt/openrobots/bin
As an alternative to the above configuration, commands can be executed by
using the `env.sh' wrapper. For instance, roscore can be started like so:
/opt/openrobots/etc/ros/env.sh roscore
In Bourne shell scripts, the following file can be sourced instead:
/opt/openrobots/etc/ros/setup.sh
=> Dependency hpp-util-3.1.0 already installed
=> Required system package kineoworks>=2.07<3: MISSING
=> Dependency ros-resource-retriever-1.11.5 already installed
=> Dependency ros-robot-model-1.11.5 already installed
=> Dependency tnftp-20130505~ssl already installed
ERROR: ======================================================================
ERROR: Missing system packages required for kpp-interface-2.1.2:
ERROR:
ERROR: kineoworks>=2.07<3
ERROR:
ERROR: Please use the system package management tool to install these
ERROR: dependencies. If a robotpkg version of a dependency is available,
ERROR: you can configure robotpkg.conf to use this version instead.
ERROR:
ERROR: See /local/robotpkg/var/tmp/robotpkg/graphics/kpp-interface/work/sysdep.log for details.
ERROR: ======================================================================
make[2]: *** [sys-depends] Error 2
===> Deinstalling for kpp-interface
Removed digest-20080510
Removing dependency hpp-model-3.1.1
Removing dependency hpp-util-3.1.0
Removing dependency ros-resource-retriever-1.11.5
Removing dependency ros-robot-model-1.11.5
Removing dependency ros-srdfdom-0.2.7
Removing dependency urdfdom-headers-0.3.0
Removing dependency
Removed hpp-model-urdf-3.1.0r1
Removed tnftp-20130505~ssl