hardware/peak-linux-driver

Software Interface for PEAK-System CAN-Hardware.
Directory:
hardware/peak-linux-driver (package's history)
Package version:
peak-linux-driver-7.15.2
Home page:
http://www.peak-system.com/fileadmin/media/linux/
License:
gnu-gpl-v3
Source archive:
http://www.peak-system.com/fileadmin/media/linux/files/peak-linux-driver-7.15.2.tar.gz
Description:
PCAN-Light for LINUX is the easy to use Software Interface for PEAK-System CAN-Hardware. The PCAN drivers for LINUX work with Kernel Version 2.4 up to Kernel 2.6.26. The complete package is distributed under the GPL The API (Application Programming Interface) for the different PCAN-PC hardware is the same. This make it easy to develop software which work with different PEAK CAN-Hardware Interface. But be carefull while using these drivers with non PEAK CAN PC Hardware. The PEAK-CAN Hardware Moduls and drivers use special fiunctions which are only running with a 100% compatible PCAN-PEAK Hardware. Supported Hardware: PCAN-ISA PC-ISA I + II CAN-Interface one and two channel PCAN-PC/104 PC/104 CAN-Interface one and two channel PCAN-Dongle PC-Parallel Port CAN-Interface one channel PCAN-PCI PC-PCI CAN-Interface one or two channel PCAN-PCI Express PC-PCI Express CAN-Interface one or two channel PCAN-PC Card PC-PC Card (PCMCIA) CAN-Interface one or two channel PCAN-PC/104plus PC/104plus CAN-Interface one and two channel PCAN-USB PC-USB CAN Interface PCAN-OEM All OEM-Mainboards Boards with PEAK-CAN Interface (DigitalLogic-PC/104 CAN cards, Kontron with CAN on board, etc)
Run dependencies:
kernel-3.13.0-117-generic, popt>=0
Build dependencies:
digest>=20080510, gcc>=3, install-sh, patch>=2.0, pax, pkg_install>=20110805.7, tnftp>=20091122
General options:
debug
Produce debugging information for binary programs
c-compiler alternatives:
gcc
Use the GNU C compiler
clang
Use the LLVM C compiler
ccache-gcc
Use ccache and the GNU C compiler
ccache-clang
Use ccache and the LLVM C compiler